The storage management of titanium dioxide powder is the key link to ensure its performance stability, safety and production efficiency. Reasonable storage can not only prolong the service life of titanium dioxide powder, but also avoid quality problems and environmental pollution caused by improper storage.

Properties and Storage Requirements of Titanium Dioxide Powder

Titanium dioxide powder is a white inorganic compound, which has the following obvious physical and chemical characteristics, which directly affect its storage requirements:

Fine particles, easy to absorb moisture: Ti02 powder particles are usually very fine, and the average particle size is generally between 0.2 micron and 0.4 micron. Because of the large surface area of particles, it is easy to absorb moisture, and the ti02 powder will agglomerate after being wetted, which will affect the fluidity and dispersibility, and then affect its application effect.

Strong chemical stability: Titanium dioxide powder has good chemical stability and is not easy to react with oxygen, carbon dioxide or water in the air, so it has a long storage life. However, it is sensitive to acidic and alkaline substances, and pollutants in the storage environment will lead to its performance degradation.

High hiding power and whiteness: Titanium dioxide powder is widely used for its high whiteness and hiding power, and any external pollution may affect its whiteness, so it is very important to avoid pollution during storage.

Fire protection requirements: Titanium dioxide powder itself is non-flammable, but in dry state, if it is mixed with combustible substances or comes into contact with some chemicals, it may cause fire, so the storage environment needs to strictly control the fire source.

To sum up, the storage requirements of titanium dioxide powder are high, and reasonable storage measures can avoid adverse factors such as humidity, pollution and fire from affecting its quality and use effect.

Requirements for Storage Environment of Titanium Dioxide Powder

In order to maintain the ideal quality of tio2 powder, it is necessary to provide a suitable storage environment. The following are the environmental conditions that must be met when storing tio2 powder:

Dry environment: Titanium dioxide powder is very sensitive to moisture, and it is easy to agglomerate after moisture absorption, which will even affect its performance in a long-term humid environment. Therefore, ti02 powder should be stored in a dry and well-ventilated place. The relative humidity should be controlled below 50%, especially in high humidity areas, and it is especially necessary to strengthen air control and the use of dehumidification equipment.

Temperature control: Although ti02 titanium dioxide has good chemical stability, extremely high temperature may affect its physical properties, especially its fluidity. The temperature of the storage environment should be kept within the normal temperature (generally 5-35 C) to avoid extreme situations of too high or too low temperature.

Good ventilation: Titanium dioxide powder may produce dust when stored, so the storage area should have a good ventilation system to reduce the accumulation of dust and the concentration of particulate matter in the air to ensure the health of operators. At the same time, ventilation can help adjust the temperature and humidity to ensure that the storage environment meets the requirements.

Pollution prevention: Titanium dioxide powder is very sensitive to external pollutants, so contact with oil, chemicals and other impurities should be avoided during storage. Storage containers, equipment and ground should be kept clean to avoid pollutants from penetrating into titanium dioxide powder.

Fire safety: Although tio2 powder itself is not flammable, it should strictly abide by the fire prevention regulations during storage and handling to avoid contact with fire sources and heat sources. The storage area should be far away from open flames and high temperature sources, and the storage environment should be equipped with fire fighting equipment and fire extinguishing equipment.

Shock-proof and moisture-proof: In the warehouse where titania tio2 is stored, violent vibration and humid environment should be avoided as far as possible. Moisture-proof measures, such as moisture-proof pads and sealed packaging, should be used to ensure that titanium dioxide powder will not be affected by moisture and external vibration during storage.

The storage management of titanium dioxide powder is very important to ensure product quality and safety in use. Reasonable storage conditions and standardized management measures can effectively avoid the influence of environmental factors on product performance, improve production efficiency and reduce accident risk.