Titanium dioxide for synthetic leather production

When producing synthetic leather, the choice of chloride-based titanium dioxide or sulfate-based titanium dioxide should be based on comprehensive considerations of product performance requirements, cost budget and environmental regulations.

Shiriki

WASILIANA NA SASA Pakia faili kwa pdf

Maelezo

Lebo

Onyesho la bidhaa

Usimamizi wa uadilifu, hesabu ya kutosha, huduma bora baada ya mauzo, bidhaa za ubora wa juu, bei nzuri, na huduma nzuri.

PRODUCT DISPLAY

vipimo

Usimamizi wa uadilifu, hesabu ya kutosha, huduma bora baada ya mauzo, bidhaa za ubora wa juu, bei nzuri, na huduma nzuri.

Sifa mahususi za sekta

Nambari ya CAS.

13463-67-7

Sifa nyingine

Item	Technical indicators
Oil Obsorption	≤26 g/100g
PH ‌	6.5-8.0
Sieve Residue(45mesh)	≤0.1%
Water extract resistivity	20
TiO₂ content	≥98.0%

Wakati wa kuongoza

Kiasi (kilo)	1 - 25	26-1000	1001 -25000	>25000
Wakati wa kuongoza (siku)	5	7	15	Ili kujadiliwa

Recommended choices in the field of synthetic leather
1. Scenarios where chloride-based titanium dioxide is preferred
High-end synthetic leather (such as automotive interiors, luxury packaging materials, and outdoor furniture leather):
If high weather resistance (UV resistance, anti-yellowing), high whiteness and glossiness are required, chloride-based rutile titanium dioxide is the first choice.

Light-colored/high-whiteness synthetic leather:
The blue phase whiteness of chloride-based titanium dioxide is better, which can reduce the amount of fluorescent brighteners.

Regions with strict environmental protection requirements (such as the European Union and North America):
The chloride process is more in line with REACH, RoHS and other regulatory requirements.

2. Scenarios where sulfuric acid-based titanium dioxide can be considered
Mid- and low-end synthetic leather (such as ordinary shoe materials and low-priced luggage):
When cost-sensitive, sulfuric acid-based titanium dioxide is more cost-effective.

Dark-colored or synthetic leather with low covering requirements:
If the amount of titanium dioxide added in the formula is small (such as <5%), sulfuric acid-based anatase titanium dioxide can be used.

Non-outdoor use:
For indoor furniture leather and other scenes that do not require high weather resistance, sulfuric acid products can meet the needs after surface treatment.

Precautions
Dispersion optimization:
Sulfate-based titanium dioxide needs to be matched with more dispersants, otherwise it is easy to cause the surface of synthetic leather coating to be rough.

Process adaptability:
Chloride-based titanium dioxide is more suitable for dry PU leather (high-temperature calendering process).
Sulfate-based titanium dioxide can be used for wet PU leather (the effect of acid residue on the coagulation bath needs to be controlled).